|
|
|
Administration
|
|
|
| Chairperson |
Rockland |
| Coordinator |
juliano |
|
Administration |
|
|
| |
|
The mechanical engineering technology (MET) program offers an opportunity for further education to students who have completed an associate's degree in mechanical engineering technology at a community college, technical institute, or who have an equivalent education. In addition to the mandatory courses as specified in the MET program, the student must take at least two cohesive electives from the approved list of MET electives. This option is accredited by TAC of ABET. Typical Mechanical Engineering Technology AAS Program students who expect to transfer to the junior year of this B.S.E.T. program should have successfully completed most of the following courses or equivalent in their first two years of study. A minimum of 64 semester hour credits is required in: - Communications
- College Algebra and Trigonometry
- Unified or Applied Calculus
- Physics I and II/Chemistry
- Computer Programming Language or Applications
- Engineering Graphics
- Mechanics I and II (Statics and Dynamics)
- Social Science/Humanities
- Strength of Materials with Lab
- Kinematics/Mechanisms
- DC/AC Circuits
- Metallurgy
- Manufacturing Processes
- Computer-Aided Drafting
- Physical Education
|
|
|
| Mechanical Engineering Technology Option |
64 credits |
9 |
|
| |
|
Mechanical Engineering Technology Option
(64 credits)
|
|
Freshman (31 credits) FIRST YEAR:
1st Semester:
math138,phys102,phys102a,met103,hum101,cs101,et101,frshsem
|
| | | Math 138 | General Calculus I (3-0-3) | | | | Phys 102 | General Physics (3-0-3) | | | | Phys 102A | General Physics Laboratory (0-2-1) | | | | MET 103 | Engineering Graphics & Intro. to CAD (1-2-2) | | | | HUM 101 | English Composition: Writing, Speaking, Thinking I (3-0-3) | | | | CS 101 | Computer Programming and Problem Solving (2-1-2) | | | | ET 101 | Introduction to Engineering Technology (0-2-1) | | | | Frsh Sem | Freshman Seminar (1-0-0) |
|
|
2nd Semester:
math238,phys103,phys103a,met105,eng200,{Elective;HUM 211, HUM 212 or Hist 213:GUR;3-0-3},{PE;Physical Education;0-1-1}
|
| | | Math 238 | General Calculus II (3-0-3) | | | | Phys 103 | General Physics (3-0-3) | | | | Phys 103A | General Physics Laboratory (0-2-1) | | | | MET 105 | Applied Computer Aided Design (1-2-2) | | | | Eng 200 | Communicating in Organizations (3-0-3) | | | | Elective | (HUM 211, HUM 212 or Hist 213:GUR) (3-0-3) | | | | PE | (Physical Education) (0-1-1) |
|
|
Sophomore (33 Credits) SECOND YEAR:
1st Semester:
met235,met205,ecet319,{Elective;HSS 202 or Rutgers Equivalent:GUR;;3-0-3},chem301,{PE;Physical Education;0-1-1}
|
| | | MET 235 | Statics for Technology (3-0-3) | | | | MET 205 | Advanced Computer Aided Design (2-2-3) | | | | ECET 319 | Electrical Systems and Power (2-2-3) | | | | Elective | (HSS 202 or Rutgers Equivalent:GUR) (3-0-3) | | | | Chem 301 | Chemical Technology (2-2-3) | | | | PE | (Physical Education) (0-1-1) |
|
|
2nd Semester:
met236,met237,me215,{Elective;HUM 211, HUM 212 or Hist 213:GUR;3-0-3},ss201,{Elective;Technical;2-2-3}
|
| | | MET 236 | Dynamics for Technology (2-0-2) | | | | MET 237 | Strength of Materials for Technology (2-2-3) | | | | ME 215 | Engineering Materials and Processes (2-2-3) | | | | Elective | (HUM 211, HUM 212 or Hist 213:GUR) (3-0-3) | | | | SS 201 | Economics (3-0-3) | | | | Elective | (Technical) (2-2-3) |
|
|
Junior (31 credits) THIRD YEAR:
1st Semester:
math309,met301,met303,met314,{Open Elective;Eng 352:GUR;3-0-3}
|
| | | Math 309 | Mathematical Analysis for Technology (4-0-4) | | | | MET 301 | Analysis and Design of Machine Elements I (2-2-3) | | | | MET 303 | Applied Thermodynamics (3-0-3) | | | | MET 314 | Dynamics of Machinery (2-2-3) | | | | Open Elective | (Eng 352:GUR) (3-0-3) |
|
|
2nd Semester:
met302,met304,ecet329,{chem301|{Elective;Technical;2-2-3}},{Elective;Free;3-0-3}
|
| | | MET 302 | Analysis and Design of Machine Elements II (3-0-3) | | | | MET 304 | Applied Fluid Mechanics (2-2-3) | | | | ECET 329 | Analog and Digital Electronics (2-2-3) |  | | Chem 301 | Chemical Technology (2-2-3) or | | | Elective | (Technical) (2-2-3) | | | | Elective | (Free) (3-0-3) |
|
|
Senior (33 credits) FOURTH YEAR:
1st Semester:
met401,met415,mnet414,{Elective;Lit/Hist/Phil/STS:GUR;3-0-3},{Elective;Technical;2-2-3},{Elective;Technical;2-2-3}
|
| | | MET 401 | Mechanical Design Project I (2-0-2) | | | | MET 415 | Automatic Control Systems (2-2-3) | | | | MNET 414 | Industrial Cost Analysis (3-0-3) | | | | Elective | (Lit/Hist/Phil/STS:GUR) (3-0-3) | | | | Elective | (Technical) (2-2-3) | | | | Elective | (Technical) (2-2-3) |
|
|
2nd Semester:
met448,mgmt390,mnet315,{Elective;Capstone Seminar:GUR;3-0-3},{Elective;Technical;2-2-3},{Elective;Technical;2-2-3}
|
| | | MET 448 | Mechanical Design Project II (0-2-1) | | | | Mgmt 390 | Principles of Management (3-0-3) | | | | MNET 315 | Industrial Statistics (2-2-3) | | | | Elective | (Capstone Seminar:GUR) (3-0-3) | | | | Elective | (Technical) (2-2-3) | | | | Elective | (Technical) (2-2-3) |
|
|
Electives Open Elective in Humanities and Social Science GUR: Students must take one 300-level course from any of the following fields: English (Eng); history (Hist); literature (Lit); philosophy (Phil); science, technology, and society (STS); social science (SS); or theater (Thtr). Students also may satisfy this requirement with Architectural History IV (Arch 382) or by taking an approved 300-level course at Rutgers-Newark. The department recommends engineering technology majors take Eng 352 to fulfill this requirement. Lit/Hist/Phil/STS GUR: Students must take one 300-level course from any of the following fields: literature; history; philosophy; or science, technology, and society (STS); or an approved 300-level course at Rutgers-Newark. Capstone Seminar in Humanities and Social Science GUR: All students, except those enrolled in the honors college, take one of the following: HSS 403, HSS 404, HSS 405, HSS 406, HSS 407, HSS 408, HSS 409. Students enrolled in the honors college take one from HSS 491H-499H. * Free: Consult the program coordinator. Students entering with fewer than 9 credits in humanities/social science must take an appropriate humanities/social science course to fulfill the NJIT GUR. ** Computer programming or applications course. Suggested Technical Electives: Co-op A co-op course must be approved by the faculty advisor. For the B.S.E.T. option in mechanical engineering technology, MET 395 is taken as an elective for degree credit and MET 495 may be taken as additive credit.
|
|
|
| |
